VUOXA Allegro P

• Maximum purified water volume: 7.5 liters;
• Special valve for draining water if the pressure in the tank exceeds 4 atm;
• Double-sealed housings;
• Withstands pressures up to 25 atm., at least 100,000 pressure surge cycles. Tested at the Institute of Precision Mechanics;
• All necessary installation parts included.

WATER PURIFICATION STAGES WITH THE VUOXA ALLEGRO P REVERSE OSMOSIS SYSTEM:

Pre-filtration (preparation of water to increase the membrane lifespan):

• Sediment cartridges PP 5 – 10SL — remove insoluble particles up to 5 microns (rust, suspended solids);
• CBC 10 – 10SL — carbon block made from high-quality coconut activated carbon with 10 micron porosity. Lifespan: 6 – 12 months, depending on water quality.
• Reverse osmosis membrane 1812-50 GPD — removes all impurities, including bacteria and viruses. Lifespan: 1 – 3 years (depending on water quality).
• Carbon post-filter (activated carbon) — improves water taste. Lifespan: 12 months.

• Dimensions of the water purifier body (assembled): 470x430x420 mm;
• Water temperature: not more than 40 °C;
• Productivity: up to 200 liters per day;
• Operating pressure: from 2 atm;
• Storage tank volume: 12 liters (the volume of water in the storage tank is 40-70% of its capacity, depending on the pressure in the supply line);
• Warranty: 3 years;
• Service life: 10 years;
• Body material: opaque plastic;
• Filter type: reverse osmosis;
• Water type: hard, very hard;
• Mineralization: no;
• Pump (booster): yes;

• Assembled body with filtering elements on a frame;
• 12-liter plastic storage tank;
• Faucet for clean water;
• Pump with power supply unit;
• High and low pressure relay 1/4″;
• Straight check valve 1/4″;
• Solenoid valve 1/4″;
• Auto water switch 1/4″;
• Drain clamp 1/4″;
• Drain controller 1/4″;
• Adapter-valve;
• Tube 1/4″;
• Fittings;
• SW-1 10SL key;
• Instruction manual.