VUOXA Allegro

• Maximum Clean Water Volume: 7.5 l
• Special valve for water drainage at tank pressure above 4 atm.
• Double sealing of cartridges.
• Withstands pressures up to 25 atm., no less than 100,000 water hammer cycles.
• Tested at the Research Institute of Precision Mechanics.
• All necessary components for connection are included.

Water Purification Stages with VUOXA Allegro Reverse Osmosis System:

Preliminary Purification (Water Preparation to Increase Membrane Life):

• Sediment cartridges PP 5 – 10SL — removes insoluble particles up to 5 microns (rust, suspensions) – 2 pcs.
• CBC 10 – 10SL — carbon block from high-quality coconut activated carbon with a porosity of 10 microns – 1 pc.

Resource: 6 – 12 months, depending on water quality.

• Reverse Osmosis Membrane 1812-50 GPD — removal of all impurities, including bacteria and viruses. Resource: 1 – 3 years (depending on water quality).
• Carbon Post-filter (activated carbon) — improves the taste quality of water. Resource: 12 months.

• Overall dimensions of the assembled water purifier housing, no more than, mm: 470x430x420
• Water temperature no more than 40 °C
• Productivity up to 200 l/day
• Operating pressure from 3 atm.
• 12-liter storage tank (the water volume in the storage tank is 40-70% of its volume, depending on the pressure in the supply pipeline).
• Warranty 3 years
• Service life 10 years
• Housing Material: Opaque plastic
• Filter Type: Reverse Osmosis
• Water Type: Hard, very hard
• Mineralization: No
• Pump (Booster Pump): No

• Filter housings with elements assembled on a frame
• 12-liter plastic storage tank
• Clean water tap No. 3
• 1/4″ straight check valve
• 1/4″ water auto switch
• Drain clamp
• 1/4″ drain controller
• Adapter tap
• 1/4” tube
• Fittings
• Key SW-1 10SL
• Instruction manual